2022 Ryan® Lawnaire® V Base
- Year 2022
 - Make Ryan®
 - Model Lawnaire® V
 - Engine Honda® GX120
 
2022 Ryan® Lawnaire® V
TESTED. TRIED. PROVENWith Easy Steer Technology, the Lawnaire IV & V maneuver around highly landscaped areas fast and efficiently. Designed to rotate independently while driving, innovative tine assemblies allow you to steer without removing the tines from the ground—opening up a whole new world of productivity
Features may include:
3/4" (19MM) DIAMETER STEEL CORING TINES- Unlike everyone else, our hardened alloy steel coring tines stay in the ground when you turn—and durable enough to keep you out on the turf and out of the shop.
 
- Feel confident with your investment with a sturdy front bumper guard, protecting vital components from accidents and mistakes.
 
- Get the exact down pressure and weight distribution you need by attaching or removing weights or adding water to the front drum.
 
- Facing tight terrain and landscaping? The Lawnaire IV fits with its 19-inch aeration width. Need to maximize your productivity? The Lawnaire V has you covered with 26.5-in aeration width.
 
- Save your strength with Easy Steer Technology and easily maneuver along paths and contours or when pulling off a 180° turn. Outer tines rotate faster during turns to maintain deep core penetration without tearing up turf, increasing your productivity without sacrificing quality.
 
- Remove weights to make it easier to lift. Or fold up its handles to make it compact for small trailers. Or remove rear wheels if you’re in a tight space. Durable and lightweight, this machine transports from job to job with ease.
 
Engine
							Engine
							Honda® GX120
						
						
							Starter
							Recoil start
						
						
							Cycle Time
							4-cycle
						
						
							Displacement
							7.2 cu in. (118 cc) 
						
						
							Lubrication
							Lubrication: Grease zerks on the wheels & idler pivot / oil chain
						
						Drivetrain
							Clutch
							Belt tightener
						
						Wheels & Tires
							Tires, Rear Specification
							(2) 8 x 2.25 semi-pneumatic with ball bearings
						
						Electric
							Electrical
							On/off switch
						
						Operational
							Operating Conditions
							Productivity: Aerates up to  40,000 sq ft/hr (3,716 m2/hr) at 3.5 mph
						
						
							Drive System
							Primary: 4L section V-belt | Tine & Drum: Single #40 nickel-plated chain
						
						Dimensions
							Dimensions
							Core Diameter: 0.75 in. (19 mm) | Aeration Pattern: 3.75 in. x 7 in. (95 mm x 178 mm) | Holes per Sq Ft: Up to 9 per sq ft (59/m2)
						
						
							Tine Diameter
							Tines: 0.75 in. (19 mm) diameter coring-type formed from 0.08 in. (2 mm) hollow, hardened alloy stee
						
						
							Width
							Aerating: 26.5 in. (673 mm) | 35.5 in. (902 mm) 
						
						
							Length
							35.5 in. (902 mm) 
						
						
							Height
							48.5 in. (1,232 mm)
						
						
							Depth, Maximum
							Coring: Up to 2.75 in. (70 mm) 
						
						Capacities
							Fuel Capacity
							0.53 gal (2 L) 
						
						
							Oil capacity
							0.59 qt (0.56 L) 
						
						Weights
							Weight
							Wet w/o Weights: 250 lb (113 kg) | Wet w/Weights: 292 lb (132 kg) | Wet w/Weights and Water in Drum: 357 lb (162 kg)
						
						Features
							Features
							Number of Tines: 42 tines per aerator